+860-223-6412
1146 East Street, New Britain, CT 06051 · NADCAP | ISO 9001:2015

Stainless Steel Passivation

When Do Stainless Steel Parts Need Passivation?

JH Metal Finishing in New Britain helps Connecticut manufacturers in Berlin, Bristol, and beyond understand stainless steel passivation, ASTM requirements, surface contamination, and when cleaning alone may be enough.

10–12 min read
Request a Quote
Stainless steel parts prepared for passivation at a Connecticut metal finishing shop
✓

12 Questions to Ask Before Sending Stainless Steel Parts for Passivation

1

Does the drawing require passivation?

Check the finish callout and purchase order before deciding cleaning alone is enough.

2

Which stainless steel alloy are you using?

The grade and condition help determine the appropriate treatment.

3

How were the parts manufactured?

Machining, grinding, and shared tooling can introduce iron contamination.

4

Were the parts welded?

Passivation and heat-tint removal address different problems.

5

Is the surface ready for treatment?

Oil, coolant, scale, and heavy rust may require preparation first.

6

Where will the parts be used?

Moisture, washdowns, and chemical exposure affect corrosion concerns.

7

Which specification governs the work?

Send the exact requirements rather than a general request to “passivate.”

8

What testing does the customer require?

Confirm the verification method and sampling requirements before processing.

9

Are the drawings current?

Include the correct revision and any customer quality requirements.

10

Are there blind holes or tight joints?

Flag areas that could trap cleaning or treatment solutions.

11

Will the parts need more machining afterward?

Plan the sequence so later work does not undo the treatment.

12

How will finished parts be handled and packed?

Clean gloves, suitable packaging, and separation from carbon steel help prevent recontamination.

01.

What Should Connecticut Machine Shops Include in a Metal Finishing RFQ?

A batch of stainless steel parts has just come off the mill, the press brake, or the welding table, and someone has to decide whether a good cleaning will do or whether the parts need passivation before they ship. It is a common question, and the answer is not always yes. Sometimes degreasing really is enough. Other times the drawing requires passivation outright, or the way the parts were made has left contamination that ordinary cleaning will not touch.

We field this question regularly at JH Metal Finishing. We have operated a finishing shop in New Britain since 1953, and many of the parts that come through our door start out at machine shops and fabricators a short drive away, from Berlin to Bristol. This guide covers what passivation does, when it makes sense, what the governing standards say, and what to have ready before you ask for a quote.

02.

Why does stainless steel rust if it is supposed to resist corrosion?

Stainless steel owes its corrosion resistance to chromium. When a clean stainless surface is exposed to air, the chromium forms an extremely thin oxide film, usually called the passive layer, that shields the iron underneath. The steel builds this protection on its own, as long as the surface is clean and has access to oxygen.

The catch is that manufacturing rarely leaves a surface clean. Machining, grinding, forming, and handling can smear or embed tiny particles of ordinary iron from cutting tools, fixtures, and shop dust. Embedded and loose iron are the most frequent problem in stainless fabrication, along with contamination from abrasives and wire brushes that were previously used on carbon steel.

Those particles are not stainless, so they rust. The result can look as if the part itself is failing. In worse cases, corrosion that starts at a contaminant can spread into the surrounding surface as pitting. Stainless steel is stain resistant, not stain proof, and the difference often comes down to what has touched the surface.

03.

What does passivation actually do?

Passivation is a chemical treatment, typically an acid bath, that dissolves free iron and other foreign material from the surface without significantly attacking the stainless steel itself. Once that contamination is gone, the chromium-rich passive film can form evenly across the part.

"Free iron" is the important term. ASTM A967 defines it broadly to include iron contamination, tool marks, iron dust, residual salts from pickling solutions, iron deposits in welds, embedded iron, and iron oxide. If your parts have picked up any of these during production, passivation is the process designed to remove them.

Passivation is not a coating.

It adds no meaningful thickness and does not noticeably change the part's appearance, which is one reason it suits tight-tolerance machined components.

04.

What can passivation not fix?

This is where expectations most often go wrong. Passivation is a relatively mild process, and several common problems are beyond its reach:

01

Weld heat tint and scale

The straw-to-blue discoloration around a weld is a chromium-depleted oxide. Passivation acids do not dissolve it.

02

Heavy rust or deeply embedded particles

These may need mechanical cleaning or a more aggressive chemical step first.

03

Physical surface damage

Scratches, pits, burrs, and rough finishes remain as they were.

04

Alloy and design limits

Passivation will not make a 303 part perform like 316 in salt spray, and it cannot fix crevices where moisture collects in service.

05.

How is passivation different from cleaning, pickling, and electropolishing?

These four processes often get mentioned in the same breath, but each solves a different problem.

01

Cleaning

Cleaning removes oils, coolant, chips, and shop soil. ASTM A380 describes a wide range of methods, from alkaline and solvent cleaners to vapor degreasing and ultrasonics. Cleaning is also the first step of any good passivation job, because acid cannot reach iron that is sitting under a film of oil. That is why we offer vapor degreasing and cleaning to TT-C-490 alongside passivation.

02

Pickling

Pickling is considerably more aggressive. It uses stronger acid blends to dissolve weld scale, heat tint, and heavy oxides by removing a thin layer of the metal itself, and it usually leaves a dull, matte gray surface.

03

Electropolishing

Electropolishing uses electrical current to remove a controlled layer of surface metal. It smooths and brightens the part and removes heat tint in the process.

04

Passivation

Passivation works on surface chemistry. It removes free iron and promotes the passive film, but it does not polish, smooth, or remove scale.

In practice, a welded assembly with visible heat tint usually needs pickling or electropolishing before passivation, or in place of it. Pickling and electropolishing are not part of our service lineup, so if your parts need that step, it helps to plan the sequence early. Tell us what the parts have been through, and we can talk about what makes sense for the order of operations.

06.

When is passivation worth considering, or required?

Not every stainless part needs passivation. ASTM A380 itself acknowledges that in some cases, degreasing or removing gross contamination is all that is necessary. The decision usually comes down to a handful of questions.

Does the drawing or purchase order call for it?

If so, the decision has been made for you. A callout such as "passivate per ASTM A967" is a requirement, and the parts do not conform without it.

How were the parts made?

Machining with steel tooling, grinding, tumbling in media that has seen carbon steel, and fabrication on shared equipment all raise the odds of free iron. Free-machining grades such as 303 and 416 deserve extra care, because the sulfur added for machinability affects how they respond to acid. They need a passivation approach suited to the grade.

Were the parts welded?

Welds can carry iron deposits as well as heat tint. Passivation addresses the first. The second needs a different process before passivation can do its job.

Where will the parts live?

Components headed for humid, outdoor, washdown, or chemical environments stand to gain more than parts that will sit sealed inside a dry enclosure.

What happens if a part rusts?

A rust spot on an internal bracket is a nuisance. On a customer-facing component, a sanitary part, or a precision assembly, it can mean a rejected lot and an uncomfortable phone call.

If you are on the fence, ask. We would rather help you specify passivation because it fits the part than see it added out of habit, or skipped when it matters.

07.

What do ASTM A967 and ASTM A380 actually cover?

These two standards come up constantly, and they do different jobs.

Practice

ASTM A380

ASTM A380 is a practice. Think of it as a guide to sound procedure. It offers recommendations and precautions for cleaning, descaling, pickling, and passivating stainless steel parts, assemblies, equipment, and installed systems, including how to avoid iron contamination along the way. It explains methods and good habits rather than prescribing a single treatment.

Specification

ASTM A967

ASTM A967 is a specification. It defines specific passivation treatments, including nitric acid immersion, citric acid immersion, and electrochemical treatment. It also provides alternative tests, with acceptance criteria, to confirm that a treatment worked. Those test practices include water immersion, high humidity, salt spray, copper sulfate, and potassium ferricyanide-nitric acid tests.

One point surprises people. A967 does not choose the treatment or the test for you. The specification states that it makes no recommendation about which grade, treatment, or acceptance criteria suit a particular application. Those choices belong to the buyer and the governing documents.

That is why the paperwork matters more than the name of the standard. Your drawing, purchase order, any customer or prime contractor specification, and the stated acceptance requirements govern the work. If a drawing simply says "passivate" with no specification, or names ASTM A967 without a treatment or test, we will ask before processing. Some aerospace and defense drawings call out other passivation specifications, so send exactly what the print says and we will confirm whether we can meet it.

When a specification calls for salt spray verification, it helps that salt spray testing to ASTM B117 is already one of the services we offer.

08.

What should you send with a request for quote?

A complete package saves a round of emails and helps us quote the job you actually need. Before you request a quote, gather the following:

01

Alloy and condition

The exact grade (304, 316, 17-4 PH, 303, 416, and so on) and heat treat condition, since the right treatment depends on the grade.

02

Drawings

The current revision, with the finish callout visible.

03

Dimensions and quantities

Part size, estimated surface area, lot quantity, and any expected repeat volume.

04

Surface condition

Whether parts are freshly machined, ground, welded, tumbled, or already showing rust.

05

Prior processing

Heat treating, welding, or other operations already performed, and in what order.

06

Required specifications

The governing spec and revision, the treatment method if one is stated, and any customer flowdowns.

07

Testing

Which verification tests are required and on what sampling basis.

08

Documentation

Certificates of conformance or other quality records you need returned with the parts.

09

Packaging and handling

Critical surfaces, how parts should be separated, and how they should be packed for return.

Our parts information requirements page lists everything else we ask for on any job, including purchase order and revision details, quality clauses, and your preferred return shipping method.

09.

How do you prevent problems before and after passivation?

Most passivation trouble is preventable, and much of it happens outside the tank.

Before processing

Keep stainless separate from carbon steel in the shop. Use stainless or dedicated brushes and abrasives, and avoid grinding carbon steel near finished stainless parts. Remove heavy oils and coolant before shipping, or let us know they are present. Finish all machining first. Passivation should be one of the last steps, because any surface cut afterward no longer carries the benefit.

It also helps to flag blind holes, crevices, and tight joints on the drawing or in your notes. Cleaning and treatment solutions can become trapped in those areas, a design concern ASTM A380 specifically raises.

After processing

Recontamination is the quiet way good passivation gets undone. Handle finished parts with clean gloves, keep them off steel benches and out of steel bins, and store them away from areas where grinding dust drifts. Use low-chloride markers if parts must be labeled. Pack them clean and dry, separated from carbon steel components. If a part is reworked after passivation, plan on passivating it again.

10.

Why does working with a nearby Connecticut finisher help?

Central Connecticut has been shaping metal for a long time. New Britain earned the nickname "Hardware City" as the home of Stanley Works and other large manufacturers. Berlin, which included New Britain until 1850, was the site of early colonial tinware making and of Simeon North's pistol works, where a government contract requiring interchangeable parts was signed by 1813. Bristol built a clock industry and then a spring industry that grew out of it. That history still shows in the region's mix of machine shops, stampers, and fabricators working in steel and stainless.

For passivation, proximity matters less for freight cost than for coordination. Shipping a small box of parts is often inexpensive regardless of distance. What a nearby finisher changes is how easily you can talk through a drawing question, sort out a missing specification before parts sit waiting, handle an urgent lot, or set up a predictable rhythm for repeat work. Fewer handoffs between your shop and ours also means fewer chances for finished parts to pick up contamination along the way.

At JH Metal Finishing, we work under NADCAP and ISO 9001:2015 certified quality systems, and every job starts with a review of drawings, materials, and specifications before processing begins. If you want a broader look at how local manufacturers evaluate finishing suppliers, our guide on how Connecticut machine shops choose a metal finishing company covers that question in more depth.

11.

Not sure what your parts need?

If you have stainless parts and are not certain whether they need passivation, or which treatment and testing your specification requires, send us the drawings along with a note on how the parts were made and any processing requirements. We will review what you have and talk through the appropriate next step, even if the answer is that cleaning alone will do. You can share your drawings and RFQ here or call us at 860-223-6412.

Upload an RFQ